INSIGNIA2 #29646C SS Cap Eagle

This SS cap eagle still has a good patinated silver finish. It displays and open-winged bird which looks to the viewer’s right and grasps a wreathed swastika in its talons. On the reverse there is a faint RZM circle at the left wing. One prong is broken off and the other prong is still in place. A good-looking display item here.

Excellent. $495.00

INSIGNIA2 #30052 Reich Level Political Leader's Collar Tabs

This set of collar tabs is quite attractive having the yellow gold border signifying the state level. The tabs themselves are a pink velvet color. Each tab has a gold Party style eagle affixed to the top portion of the tab. These eagles are pressed through and bent over on the back. At the lower area of the tab there are three pips. These pips have the Party eagle and swastikas in the center. These tabs would be a detachment leader type. One of the tabs has the last two pieces of the original RZM issue paper on the back. The backs reveal that the tabs have a burlap like substance. A good pair to display with other political leader items.

Excellent Plus. $295.00

INSIGNIA2 #29922 Gau Level Political Leader's Collar Tab

This high level single collar tab was acquired personally by me from the family of a veteran. The collar tab has red velvet backing and it is bordered with the wine color piping designating gau level. Applied to the top of the tab is a gilded political eagle with swastika. Below this is a large single oak leaf with an acorn on each side of its stem. Below the leaf there are two sets of overlapping oak leaves which act as a base. This collar tab is for the rank of, “Haupt-Abschittleiter”. On the reverse of the collar tab the original RZM tag is in place. This tag is blue printing with a number of, “21” stamped at the middle and a run number of, “251388”. A fine original item here which would be a great display collar tab with some other political memorabilia.

Excellent Plus. $395.00

INSIGNIA2 #29854 9TH SS Panzer Division "Hohenstaufen" Cuff Title

This SS Hohenstaufen cuff title was awarded to the 9th SS Panzer Division on one February 1943. The cuff band is a NCO variety and is only known in the bevo woven format. This cuff title shows a little bit of age and usage but it is still in excellent, displayable condition and is an outstanding original artifact. The background, of course, is a black grain cloth material and bevo woven in a gray stitching are border lines and in black letters the name of their regiment “Hohenstaufen”. There is a little staining on the “t” and “a” letters which look to be old blood. An excellent opportunity here to acquire an original, rare SS Panzer cuff title.

Excellent Plus. $2,395.00

INSIGNIA2 #29813 RAD Collar Tab

This RAD collar tab is for the rank of Unterfeldmeister. It consists of a black velvet covering which is woven with an aluminum bullion thread. The thread is extremely tight and most impressive. If you are ever wondering how to tell good German weave craftsmanship from the reproduction stuff, this woven bullion should be studied. It is so tightly constructed that it almost appears to be a solid piece of metal. The insignia is flat on one end with a small tip on the other. There are larger aluminum dual cords which run through the center of the insignia, giving it a nice accent. The reverse of the collar tab reveals the covering is over a burlap fabric.

Excellent Plus. $95.00

INSIGNIA2 #29812 Customs Official's Collar Tab

This custom official’s collar tab is nicely done, having a lined green base fabric. The fabric is trimmed with aluminum bullion shaped like saw teeth which run with the teeth inward around the entire border of the tab. At the bottom horizontal area, there is a bullion symbolic wreath. Above the wreath, there are two aluminum pips applied which go through the tab and are folded over on the reverse. The fabric is covered over a brown manila-like substance. A nice looking tab here.

Near Mint. $75.00

INSIGNIA2 #29817 Small Luftwaffe Cap Eagle

I am not sure that this is a cap eagle, as it is fairly small. It appears to have three prongs on the back, two of which have stubs still visible, and the other one on the right wing has only the remains of the seated area. The eagle is the early droop-tail type, clutching a swastika and flying to the right. There are two areas on the wings where the feathering is brighter than the rest of the bird. The majority of the metallic portion of this bird is a dull gray color. A good display example, though.

Excellent. $35.00

INSIGNIA2 #29638C Veteran Sleeve Patch

This sleeve patch consists of a red shield with second style black Iron Cross woven into the center area and a double lined swastika in the middle. This shield is bevo woven to a white silk-like background material. This insignia does not appear to have been installed.

Mint. $25.00

INSIGNIA2 #29637C Army NCO Breast Eagle

This army NCO breast eagle is a field green silk background with a gray woven open-winged eagle. The eagle is very nicely done and looks to the viewer’s right and grasps a wreathed swastika in its talons. This eagle is unissued and ready to display or install on a tunic.

Excellent Plus. $35.00

INSIGNIA2 #29626C NSRL Physical Training Patch

This physical training patch is a golden yellow color weave on a black cotton background. It features a round perimeter circle with the Third Reich sports eagle in the center. The eagle looks slightly upward to the viewer’s left, has half closed wings and has a superimposed mobile black swastika on his breast. A good-looking insignia here awarded to those that passed the physical training test.

Mint. $40.00

INSIGNIA2 #29628C Cloth RAD Service Insignia

This RAD insignia is woven to a black cloth. The background for the insignia is in a darker olive green color. It depicts a red rimmed shovel with white face and black mobile swastika in the center. The shovel is positioned over two wheat shafts. At the bottom of the depiction there is an RAD triangle with the patent pending words appearing on either side of this being, “Ges. Gesch.”. This insignia would have served the same purpose as the metal insignia on an RAD side cap.

Mint. $75.00

INSIGNIA2 #29631C Able Seaman Chevron

This chevron is made of a blue black wool material and is shaped in the form of a triangle. There is a yellow gold tress which is sewn to the bottom portion and sides of the triangle to form a “V” design. This designates rank on a naval able seaman.

Excellent Plus. $40.00

INSIGNIA2 #29630C Coastal Artillery Breast Eagle

This coastal artillery breast eagle is a very fine yellow woven example on a darker green background. The eagle looks to the viewer’s right and clutches a swastika within a wreath. The eagle feathers are touched up with green thread. A good looking breast eagle here.

Mint. $65.00

INSIGNIA2 #29632C Set of Three Hitler Youth Cap Insignia

This set of three Hitler Youth cap insignia appears to be a bevo diamond weave on white silk. The Youth insignia is very pretty with bright red, white and black swastika colors. These insignia have never been cut and obviously never issued. A good display example next to a Hitler Youth knife or like militaria.

Mint. $45.00

INSIGNIA2 #29583C RLB Hat Cockade

This RLB hat cockade is a little different from the normal type. It features the standard cockade in the center having the colors of black, white and red and then surrounding the cockade is an aluminum wreath of overlapping oak leaves. This is the designated pattern for the RLB peaked cap.

Near Mint $45.00

INSIGNIA2 #29582C RLB Hat Cockade

This cap cockade consists of a standard example that has a wreath of aluminum overlapping oak leaves run around the circumference. The oak leaves show a little bit of oxidation and there is some age to the cockade. The reverse of this cap insignia has two prongs for installing it on the cap band.

Near Mint $40.00

INSIGNIA2 #29579C Artillery Officer's Collar Tab

This Artillery Officer’s single collar tab consists of the dual aluminum braiding and a red center area designating artillery. The aluminum braiding is sewn to a green wool backing. The wool backing covers a burlap-like substance. The original threads are still on this tab from where it was taken from a tunic. If you are missing on this might fill the bill.

Excellent Plus $50.00

INSIGNIA2 #29650C Political Leader's Cap Eagle

This Political Leader’s cap eagle is a fine gilded color with lots of detail. The bird looks to the viewer’s right and has open wings. He clutches a wreath with a mobile swastika in his talons. The gilding is 100% throughout this eagle. On the reverse the three prongs are present and the bird is marked, “RZM M 1/72”.

Mint $75.00

This cap eagle is the aluminum style and it does have some oxidation in the surfaces. It is possible that it would clean up some. The eagle’s head looks to the viewer’s right and the bird has open wings and clutches a wreathed mobile swastika in its tangs. There are two prongs on the reverse, the one on the right wing having broken off. Priced accordingly.

Excellent $25.00

INSIGNIA2 #29649C Aluminum Army Cap Eagle

This cap eagle has fine detail throughout being the style eagle which looks to the viewer’s right. This bird has an open wing spread and clutches a wreath with mobile swastika. There is a small hole in the center of the swastika which was the area where the prong was placed. There were two other prongs, one on each of the reverse of the wings but all are gone to time. This eagle does not seem to have any markings on the reverse but it still shows good detail and would make a fine display example.

Excellent $50.00

INSIGNIA2 #29663C Aluminum Propeller Insignia

This ringed propeller has good detail throughout and it appears to be an addition to a collar tab to designate flight personnel. The reverse of the insignia is marked with an RZM within a circle in the center. This would lead me to believe that the insignia was made for one of the political organizations such as the SA or Hitler Youth, both of which had flying sections. An interesting piece here with two prongs intact on the reverse.

$35.00

INSIGNIA2 #29660C RAD WJ Cap Badge

This cap badge was worn by the female sector of the RAD. The badge was worn on the female fedora. It is an oval shape having a pierced center featuring a mobile swastika positioned over a set of wheat shafts. The reverse of the badge is marked with the year it was produced, “38” and the RAD triangle. The patent pending words are also there being, “Ges. Gesch.”. Only one of the original two prongs remains. A good display example here.

Excellent. $75.00

INSIGNIA2 #29662C NSDAP Political Leader's Cockade

This political leader’s cap cockade has a red lined enamel round outside with an inner metal rim featuring a floating black enamel swastika in the center. The two prongs are in place on the reverse of this cockade. The reverse is a silvered color and it is marked, “RZM M 1/34”.

Excellent Plus. $75.00

INSIGNIA2 #29417 RLB Member's Door Identification Marker

This RLB member’s door marker measures 3-inches round. In the center it is vaulted outward and features a silver sunburst having a black mobile swastika in the center. This was the insignia of the RLB. There is a lined border area which has the raised out name of the organization and the purpose all in black on a gray background. It is printed in Gothic letters, “Reichsluftschutzbund Mitglied” or “Government Air Raid Organization Member”. This disk has been factory lacquered so that it would have been protected from the elements as there are two holes on the diameter where nails or screws would have been placed to apply the insignia to the owner’s front door area. The insignia is together with its original paper separator as I’ve purchased a number of these still in the paper directly from the 101st airborne veteran who brought them back. These RLB member’s identification disks make for a great decorator item to display next to an RLB dagger or other memorabilia. Each insignia comes with the original separating tissue paper.

Unissued Mint. $150.00

INSIGNIA2 #29418 RLB Member's Door Identification Marker

This RLB member’s door marker measures 3-inches round. In the center it is vaulted outward and features a silver sunburst having a black mobile swastika in the center. This was the insignia of the RLB. There is a lined border area which has the raised out name of the organization and the purpose all in black on a gray background. It is printed in Gothic letters, “Reichsluftschutzbund Mitglied” or “Government Air Raid Organization Member”. This disk has been factory lacquered so that it would have been protected from the elements as there are two holes on the diameter where nails or screws would have been placed to apply the insignia to the owner’s front door area. The insignia is together with its original paper separator as I’ve purchased a number of these still in the paper directly from the 101st airborne veteran who brought them back. These RLB member’s identification disks make for a great decorator item to display next to an RLB dagger or other memorabilia. Each insignia comes with the original separating tissue paper.

Unissued Mint. $150.00

INSIGNIA2 #29420 RLB Member's Door Identification Marker

This RLB member’s door marker measures 3-inches round. In the center it is vaulted outward and features a silver sunburst having a black mobile swastika in the center. This was the insignia of the RLB. There is a lined border area which has the raised out name of the organization and the purpose all in black on a gray background. It is printed in Gothic letters, “Reichsluftschutzbund Mitglied” or “Government Air Raid Organization Member”. This disk has been factory lacquered so that it would have been protected from the elements as there are two holes on the diameter where nails or screws would have been placed to apply the insignia to the owner’s front door area. The insignia is together with its original paper separator as I’ve purchased a number of these still in the paper directly from the 101st airborne veteran who brought them back. These RLB member’s identification disks make for a great decorator item to display next to an RLB dagger or other memorabilia. Each insignia comes with the original separating tissue paper.

Unissued Mint. $150.00

INSIGNIA2 #29404 Cap Cords for Land Customs Officer's Visor Cap

These cap cords are the dual cords which install above the brim on a visor cap and connect to the buttons, one on each side at the band. These cap cords are a mixture of green color cord and bullion cord. There is also a green and aluminum bullion slide on each end as well as an adjustment slide and loop. These cap cords are all set to go on your land customs officer cap. Not an easy set of cords to find.

Excellent Plus. $85.00

INSIGNIA2 #29405 Initialed Land Customs Shoulder Board

This land customs shoulder board would have been worn by an agent with the rank of, “Collbetriebs-Assistent”. The shoulder board is a combination of green and bullion cords and off the center area is the initials, “RSV” and there also is one pick. This shoulder board is the slip-on type and has a good green base below.

Excellent Plus. $60.00

INSIGNIA2 #29406 Land Customs Shoulder Board

This shoulder board would have been worn by the rank of, “Zolbetriebs / Assistent”. It consists of green and bullion cords. They are a slip-on type and are in good condition throughout.

Excellent. $45.00

INSIGNIA2 #29415 Oberschutze Rank Pip

This Oberschutze rank pip is cut into a round wool patch being of field green material. In the center there is an aluminum woven style pip which indicates a higher rank when worn above a Gefreiter rank insignia.

Excellent Plus. $25.00

INSIGNIA2 #29301C Early Army Cap Insignia

This cap insignia is the second style used by the Army, but it is an early steel based version. The insignia depicts an open-winged eagle looking to the right clutching a wreathed swastika. The detail is excellent although there is quite a bit of patination in the recesses. If your cap shows wear and some soiling this eagle would probably go very good with it. The eagle is the stamped out type having hollow back and all three of the original brass prongs are still in place. This insignia looks as though it was taken off of a cap probably during a surrender.

Excellent. $65.00

INSIGNIA2 #29330C DAF Pin

This DAF pin in about 3/4-inch round and it features a cog wheel outside with a floating immobile swastika in the center. The swastika legs are textured. There is a safety pin style catch on the reverse. The reverse is not marked.

Excellent. $30.00

INSIGNIA2 #29331C DAF Pin

This DAF pin has a silvered surface and it is about 3/4-inch round. Its borders have the cog wheel and inside is a floating immobile swastika. The swastika has texturing to its legs. On the reverse of the pin there is a single prong which would have been used to retain this insignia onto a uniform.

Excellent. $25.00

INSIGNIA2 #29329C RAD Cap Insignia

This cap insignia is made of an aluminum base and it has the two prongs still in place on the reverse. The obverse depicts a RAD style shovel which is positioned between two wheat shafts. The shovel is outlined in red and the swastika in the center of the spade is filled in with a black enamel. The detail throughout the wheat shafts is excellent and this insignia should be ready to go onto your hat. It is marked on the reverse with the raised out “J.M./38”. Below this is the RAD triangle and the patent pending words “ges. gesch.” A good looking insignia here.

Excellent Plus. $75.00

INSIGNIA2 #29296C DLV Cap Insignia

This DLV cap insignia is very good looking, measuring about 2¾ inches in width. It has a round red enamel background to which is superimposed a propeller and a black enameled winged swastika. Unfortunately, some of the enamel is gone from the mobile swastika, being the 9:00 leg and the 3:00 leg. The silvering is still good, though, to the open wings and the propeller behind. This insignia is profusely marked on the reverse with the maker’s name “Wilhelm Deumer Lüdencsched” and also the patent pending marks “ges. gesch.”. The two prongs are gone from the reverse. Should the next purchaser wish to have the enamel repaired, for about $100.00 we can do this.

Excellent. $150.00

INSIGNIA2 #29072C Fire/Police Insignia

This sleeve insignia features a blue black wool background with an obverse featuring a pink colored sewn police wreath with open-winged eagle with swastika within wreath superimposed. The design is extremely well made and well detailed. This insignia would have been worn on the sleeve of a fireman’s uniform. A very attractive display piece with a nice fireman’s bayonet.

Mint. $45.00

INSIGNIA2 #29074C Luftwaffe NCO's "V" Patch

This Luftwaffe sleeve patch is circular in shape and made of a gray wool. Sewn in white thread in the obverse is a capital letter, “V”. This patch would have been worn on the sleeve of an NCO administrative official.

Excellent Plus. $25.00

INSIGNIA2 #28956C DJ Arm Patch(#100610)

This DJ arm patch consists of a squared brown background area to which is woven a wood circle having a white “S” rune in the center. The DJ arm patch has the paper tag on the reverse. The tag is an off-white color with red printing. It features a capital “A” with and RZM circle. There is also a Hitler Youth diamond featuring the swastika in the center. The run number on this issue tag is “231540”. A good-looking DJ arm patch here which would display nicely with either a DJ knife or Hitler Youth knife.

INSIGNIA2 #29173 Veterans Association Sleeve Shield

This sleeve insignia is a bevo weave on a white silk background. It features a red shield with downward point at the bottom. In the center is a Maltese style black Iron Cross which has a black and white mobile swastika in the center with a double circle around it. The black Iron Cross legs are bordered in white. This insignia is in perfect condition and appears unissued. It comes directly from the family of the veteran that brought it home. A good item to display with other veteran’s insignia.

Mint. $50.00

INSIGNIA2 #29174 Veterans Association Sleeve Shield

This sleeve insignia is a bevo weave on a white silk background. It features a red shield with downward point at the bottom. In the center is a Maltese style black Iron Cross which has a black and white mobile swastika in the center with a double circle around it. The black Iron Cross legs are bordered in white. This insignia is in perfect condition and appears unissued. It comes directly from the family of the veteran that brought it home. A good item to display with other veteran’s insignia.

Mint. $50.00

INSIGNIA2 #29175 Army Transport Boards

This pair of Transport slip-on boards are in perfect condition. They have beautiful rows of bullion on the top and the bottom consists of a rich blue wool color. This color would translate to the medical branch. These boards are the slip on type. They are in pristine condition and would display very nicely.

Mint. $100.00

INSIGNIA2 #29182 SS Italian Volunteer Sleeve Shield

This SS Italian volunteer sleeve shield is of black wool and it has the Italian Fasces woven within a shield on the obverse. The symbol is woven in yellow cotton and has a fine red trim throughout. The shield shaped border that goes around the fascist symbol is matching yellow. A fine looking unissued sleeve shield here which I bought directly from the family of the veteran that brought it back. A great item to display with an Italian dagger or other Italian SS volunteer items.

Mint. $150.00

INSIGNIA2 #29183 SS Italian Volunteer Sleeve Shield

This SS Italian volunteer sleeve shield is of black wool and it has the Italian Fasces woven within a shield on the obverse. The symbol is woven in yellow cotton and has a fine red trim throughout. The shield shaped border that goes around the fascist symbol is matching yellow. A fine looking unissued sleeve shield here which I bought directly from the family of the veteran that brought it back. A great item to display with an Italian dagger or other Italian SS volunteer items.

Mint. $150.00

INSIGNIA2 #29184 SS NCO Sleeve Eagle

This sleeve eagle is a bevo weave style cotton thread which illustrates an SS eagle looking to the viewer’s right. The eagle grasps a wreath with a mobile swastika within. Detail to the bird is extraordinary. The bird is sewn to a black wool backing. These sleeve eagles were worn by SS NCO personnel. A great item to display with your SS model 1933 dagger. This eagle was purchased directly from the family of the veteran that brought it home.

Mint. $350.00

INSIGNIA2 #29185 SS NCO Sleeve Eagle

This sleeve eagle is a bevo weave style cotton thread which illustrates an SS eagle looking to the viewer’s right. The eagle grasps a wreath with a mobile swastika within. Detail to the bird is extraordinary. The bird is sewn to a black wool backing. These sleeve eagles were worn by SS NCO personnel. A great item to display with your SS model 1933 dagger. This eagle was purchased directly from the family of the veteran that brought it home.

Mint. $350.00

INSIGNIA2 #28887C Army Pith Helmet Shield

This Pith Helmet National Shield is colored black, gray, and red, although the center area was probably white at one time. The shield is complete with the three prongs on the reverse.

Excellent. $45.00

INSIGNIA2 #28906C Blue Naval SPorts Shirt Eagle

This insignia would have been sewn to the naval sport shirt. The insignia consists of a blue open-winged Wehrmacht style eagle that has a wingspread of about 9 inches and is about 4½ inches high. The bird has outstanding detail and clutches a wreath which contains a mobile swastika. The insignia feels like a very fine cotton and it is crescent shaped with a backing material of a lesser quality cotton. A very nice item here, and you do not see naval sport shirt insignia too much.

Mint. $165.00

INSIGNIA2 #28907C Army Sport Shirt Insignia

This fine army sport shirt insignia features a black open-winged Wehrmacht eagle clutching a mobile swastika positioned on a lined cotton background. The bird stretches about 9½ inches in length and is about 4½ inches high. The soft cotton insignia is mounted on a thin cotton cloth background. A very nice item here in choice condition.

Mint. $125.00

INSIGNIA2 #28908C Luftwaffe Sports Shirt Insignia

This Luftwaffe sport shirt insignia consists of a black Luftwaffe eagle flying to the viewer’s right retaining a mobile swastika in his claw. This bird is about 8½ inches in length and his height is about 4½ inches. The black color bird is sewn onto a white lined soft cotton fabric. There is a lesser cotton fabric around the insignia and it is ready to be sewn onto a Luftwaffe sport shirt. A great looking insignia here.

Mint. $135.00

INSIGNIA2 #28881C DAF Cap Insignia

This oval shaped cap insignia is partially made of cloth and has a metal background. The oval shape has a metal rope style border and in the center, the cloth is printed with a DAF logo featuring a cog wheel with a mobile swastika inside. This logo sits atop a sprig of oak leaves. The features are all in yellow and the background is black. The metal reverse of this cap insignia is marked “RZM 347”. A good item to display with other DAF materials.

Excellent. $95.00

INSIGNIA2 #28883C RAD Cap Insignia

This RAD cap insignia is made of all aluminum. It has painted features which consist of a red border around the shovel and in the center, the mobile raised swastika is painted black. Around the swastika is a pebbled surface and below the shovel are two aluminum wheat shafts. This insignia is marked on the reverse “ges. gesch.” and also has maker markings. The original two prongs are in place on the reverse.

Excellent Plus. $65.00

INSIGNIA2 #28884C RAD Cap Insignia

This RAD cap insignia is of all aluminum construction. It has a painted border around the shovel being in red and inside there is a black painted swastika superimposed on the shovel’s face. The shovel is placed over two detailed wheat shafts. The insignia is marked on the reverse “ges. gesch.” and “gtd39”. Unfortunately, the two prongs are broken off and are gone to time. A good display piece, though.

Excellent. $50.00

INSIGNIA2 #28882C Female RAD Member's Cap Badge

This cap badge is in a gray metal color, but it may have been silvered when it was originally issued. It is an oval shape and has a pierced inside. At the upper portion of the oval, there is a mobile swastika and the swastika bottom leg sits on two wheat shafts. The reverse of the badge has two prongs for hooking it onto the cap. This badge was worn by female RAD members.

Excellent Plus. $75.00

INSIGNIA2 #27048 Marine Artillery Breast Eagle

Excellent Plus, Plus. $75.00

INSIGNIA2 #28744 POA Russian Volunteer Sleeve Shield

This sleeve shield comes from the Russians who fought with the Germans, known as the Russian Army of Liberation. The letters, “POA” stand for, “Russkaia Osvoboditel ’Naia Armiia”. These shields were worn on the left side of the uniform. The original red, white and blue coloring represents the old imperial Russian colors.

Mint. $75.00

INSIGNIA2 #28745 POA Russian Volunteer Sleeve Shield

This sleeve shield comes from the Russians who fought with the Germans, known as the Russian Army of Liberation. The letters, “POA” stand for, “Russkaia Osvoboditel ’Naia Armiia”. These shields were worn on the left side of the uniform. The original red, white and blue coloring represents the old imperial Russian colors.

Mint. $75.00